|
|
|
 |
|
129 S. Route 12 |
1530 Main St (Rt. 83) |
|
Rental
| |||||||||
|
|
 |
|
This machine is almost as
easy to run as a lawn mower. You push eight or ten foot cable sections into
the line until you reach some resistance. Then attach the rear cable
coupling to the machine, stand behind it, and turn it on. Watch the cable
feed itself into the line. When a section has run into the drain, attach
another one and keep going. This self-feeding feature also works to pull
sections out of the line. The Model 88 handles jobs up to 200 ft. long in lines from 3" to 10" diameter. A standard 3/4 hp capacitor motor supplies plenty of power, and an adjustable safety clutch protects cables and operator against sudden torque build-ups. Sections come in two styles: all-purpose Flexichain, which has a chain center, and the stiffer Proflex, which has a spring center. A chain assures easier cable retrieving if the Flexichain spring should break. The inner spring in the Proflex gives it greater stiffness, which is desirable on long or tough jobs. The outer spring is right-hand wound for faster self-feeding. Couplings are shown cables screen (see below). Both types snap together in a second and are taken apart quickly with a spanner wrench or screwdriver. With the newer “G" connector, no tension is on the locking pin when running in reverse, making it a more durable coupling. Snap on the 78L-CDC adapter and you can use 6 ft. x 7/8" cables (6L78) to clear smaller lines.
|
|
|
|
|
Copyright © 1986 - 2011 Curtis Leasing, Inc.
Prices & Equipment Subject Change
Without Notice |
